FCS in a Future Fins plug

All surfing hardware topics here. Boards, leashes, racks, wetsuits, boardies, surfgear, ding repair, wetsuit repair, surf wax...... you get the idea

FCS in a Future Fins plug

Postby Dec » Thu Jul 19, 2007 2:59 am

Right, i have a bit of a predicament! I have tons of FCS fins, but the boards that are in good shape all have future fin plugs. I can't get any over here unless someone I know brings them over, because Thai mail is soo bad and the just don't sell them here.

My question is, would sanding down the tabs on an FCS fin, placing it in the future plug (with a touch of resin) hold it? Just as a temporary until I find some Futures
User avatar
Dec
Surfing Legend
 
Posts: 1733
Likes: 0 post
Liked in: 0 post
Joined: Thu Dec 01, 2005 12:24 pm

Postby hawaiiSUCKSexceptsurf » Thu Jul 19, 2007 7:21 am

fcs is like macdonalds compared to futures.
User avatar
hawaiiSUCKSexceptsurf
SW Pro
 
Posts: 1238
Likes: 0 post
Liked in: 0 post
Joined: Sat May 22, 2004 10:44 am
Location: in your face

Postby Dec » Thu Jul 19, 2007 8:15 am

What? :lol:
User avatar
Dec
Surfing Legend
 
Posts: 1733
Likes: 0 post
Liked in: 0 post
Joined: Thu Dec 01, 2005 12:24 pm

Postby Sillysausage » Thu Jul 19, 2007 11:28 am

lol i wouldnt risk it, might block the slots? unless you just carved the fcs fins out to be like the futures (if its possible) not really sure, never witnessed such a problem. have you got any future fins at all?
Sillysausage
SW Pro
 
Posts: 1185
Likes: 0 post
Liked in: 0 post
Joined: Thu Nov 16, 2006 6:56 pm
Location: East Coast, uk

Postby Dec » Thu Jul 19, 2007 12:29 pm

Nope, don't have a pair. It's next to impossible to get some over here which really sucks.

Might have to go and buy someone elses fins.
User avatar
Dec
Surfing Legend
 
Posts: 1733
Likes: 0 post
Liked in: 0 post
Joined: Thu Dec 01, 2005 12:24 pm

Postby Sillysausage » Thu Jul 19, 2007 12:42 pm

know you said the shipping is bad? is it really bad, even in 1st class? because if you got them off a website somewhere and then got them delivered in first class it should get to you? but i don't know how bad it is over there
Sillysausage
SW Pro
 
Posts: 1185
Likes: 0 post
Liked in: 0 post
Joined: Thu Nov 16, 2006 6:56 pm
Location: East Coast, uk

Postby Sillysausage » Thu Jul 19, 2007 12:47 pm

anyway, instead of starting a new topic, just wondering if i could pop a question in, i've had fcs on 3 of my last four boards (the other one was speedfins, but i have the same problem as you there Dec, with not enough around in this country) but i'm not sure whether to get FCS or Futures on my new board? (maybe another make? not sure) any help will be great
Sillysausage
SW Pro
 
Posts: 1185
Likes: 0 post
Liked in: 0 post
Joined: Thu Nov 16, 2006 6:56 pm
Location: East Coast, uk

Postby Dec » Thu Jul 19, 2007 12:52 pm

RedX or FCS. They have the best selection. As for future, they're an American company and mainly sold in the USA, so it'd be difficult to get them . (I think)
User avatar
Dec
Surfing Legend
 
Posts: 1733
Likes: 0 post
Liked in: 0 post
Joined: Thu Dec 01, 2005 12:24 pm

Postby Sillysausage » Thu Jul 19, 2007 1:25 pm

ok cool, thanks, i'll look into REDX to see what they're like, but i might just go with the plain old FCS because their huge range of fins
Sillysausage
SW Pro
 
Posts: 1185
Likes: 0 post
Liked in: 0 post
Joined: Thu Nov 16, 2006 6:56 pm
Location: East Coast, uk

Postby kitesurfer » Thu Jul 19, 2007 2:44 pm

go for lockbox as you can get an adapter that lets them take fcs too.

KS
User avatar
kitesurfer
Surf God
 
Posts: 3533
Likes: 0 post
Liked in: 0 post
Joined: Wed Oct 19, 2005 1:20 pm
Location: In the kitchen making Harmergeddon mead!

Postby Sillysausage » Thu Jul 19, 2007 3:00 pm

i read up some on these:
FCS – If you're traveling or doing a lot of international surfing, the FCS system may be your best choice because you can find FCS fins almost anywhere. They are easily identified by their two post system which doesn't provide the stability of other box systems. The top of the surfboard may start to warp over time because the posts go all the way through to the deck.

Future – Unlike the two post system, Futures grip the entire length of the fin decreasing unusual torque.

LockBox Fin – They also grip the entire length of the fin though the fins are not as available as FCS internationally. LockBox offers a fin adapter so if you were to break a fin while traveling, you could use an FCS fin in the LockBox system. In addition, LockBox allows some movement in the box so you can change the lateral position of a fin. And in the rare event a fin breaks away, it's less likely to take the entire rail.

but i also read up that with the fcs adapters the fins sometimes pop out, i was wondering if this would be unlikely? because i don't have enough money to keep buying fins
Sillysausage
SW Pro
 
Posts: 1185
Likes: 0 post
Liked in: 0 post
Joined: Thu Nov 16, 2006 6:56 pm
Location: East Coast, uk

Postby Sillysausage » Thu Jul 19, 2007 3:12 pm

oh yea and as for the red x fins, i think they sound cool, but can't seem to fins as many places in the uk that sell them? might be wrong, although they do sound pretty cool, now, the shaper who shaped my board last time has moved away now, so i can't use him anymore, i was wondering if anyone knows any good shapers, preferably specializing in shortboards
Sillysausage
SW Pro
 
Posts: 1185
Likes: 0 post
Liked in: 0 post
Joined: Thu Nov 16, 2006 6:56 pm
Location: East Coast, uk

Postby essex sucks » Thu Jul 19, 2007 3:44 pm

yep there is lots of shapers on here i.e

ks
me but still leaning al the time
and more
User avatar
essex sucks
Surfing Legend
 
Posts: 2832
Likes: 0 post
Liked in: 0 post
Joined: Thu May 04, 2006 3:50 pm
Location: i am happy as can be

Postby Sillysausage » Thu Jul 19, 2007 3:56 pm

good thinking, i never though about that, thing is i live in wales, how hard is it to ship a board? (especially if its a precious one)
Sillysausage
SW Pro
 
Posts: 1185
Likes: 0 post
Liked in: 0 post
Joined: Thu Nov 16, 2006 6:56 pm
Location: East Coast, uk

Postby essex sucks » Thu Jul 19, 2007 4:35 pm

i will have too check but i do not see there being a problem
User avatar
essex sucks
Surfing Legend
 
Posts: 2832
Likes: 0 post
Liked in: 0 post
Joined: Thu May 04, 2006 3:50 pm
Location: i am happy as can be

Postby Sillysausage » Thu Jul 19, 2007 4:36 pm

cool
Sillysausage
SW Pro
 
Posts: 1185
Likes: 0 post
Liked in: 0 post
Joined: Thu Nov 16, 2006 6:56 pm
Location: East Coast, uk

Postby kitesurfer » Thu Jul 19, 2007 5:07 pm

Sillysausage wrote:good thinking, i never though about that, thing is i live in wales, how hard is it to ship a board? (especially if its a precious one)


It's not too difficult. The board i made for pault northswell shipped a board bag down to me and then i got my local kiteshop to ship it up to paul in newcstle. Just so long as the board is well protected it should be fine.

KS
User avatar
kitesurfer
Surf God
 
Posts: 3533
Likes: 0 post
Liked in: 0 post
Joined: Wed Oct 19, 2005 1:20 pm
Location: In the kitchen making Harmergeddon mead!

Postby essex sucks » Thu Jul 19, 2007 5:19 pm

yep i could ship it easy just checked
User avatar
essex sucks
Surfing Legend
 
Posts: 2832
Likes: 0 post
Liked in: 0 post
Joined: Thu May 04, 2006 3:50 pm
Location: i am happy as can be

Postby doormatt » Thu Jul 19, 2007 8:01 pm

i seem to remember pj's in llangennith having futures in there, i have them in my board and remember thinking "wow there is somewhere that actually sells them". hope this helps!
doormatt
New Member
 
Posts: 10
Likes: 0 post
Liked in: 0 post
Joined: Thu Jul 19, 2007 7:33 pm

Postby Sillysausage » Thu Jul 19, 2007 8:02 pm

ok, thanks guys, i need to wait a while to try and sell my board before i can get a new one. i've got £225, in my surfboard kitty, so maybe i could flog some other stuff instead of my current board, depending on how much a new board will cost.
Sillysausage
SW Pro
 
Posts: 1185
Likes: 0 post
Liked in: 0 post
Joined: Thu Nov 16, 2006 6:56 pm
Location: East Coast, uk

Next

Similar topics

Return to Surfing Hardware