Sweet skateboard

Have a chat about any general surfing related topics.

Sweet skateboard

Postby Beachbum » Fri Jun 30, 2006 10:04 am

I was wondering if anyone has this skateboard!!? http://www.skatesonhaight.com/Op-Longboards-Fish-Out-of-Water-p/opfoow.htm. It looks awesome but pricy I am tempted to buy it to start practing more on land when my parents cant take me :x . If anyone has it give me a review on durability and how it performes sinces a mini surfboard on wheels.
User avatar
Beachbum
Local Hero
 
Posts: 442
Likes: 0 post
Liked in: 0 post
Joined: Thu Jun 15, 2006 6:05 am
Location: Deep valley of Hawaii

Postby cornishboarder » Fri Jun 30, 2006 7:34 pm

it says its made out of a standard blank and therefore it will be just as fragile as a surfboard. if i was you i would get a standard wood board as at somepoint you are going to come off it and it will most likely continue down the road without you until it hits something. with a wood board it will usually only get scuffed or a little delam whereas i think a fiberglass board will just be destroyed. i dont know how the trucks have been attached either this will be a real weakness on fibreglass boards unless they have some reinforcement built in.

i would strongly suggest you get a standard longboard like the sector nine one in your other post. the fibreglass one looks way to fragile
cornishboarder
New Member
 
Posts: 11
Likes: 0 post
Liked in: 0 post
Joined: Sun Jan 08, 2006 6:32 pm

Postby Beachbum » Fri Jun 30, 2006 8:04 pm

Ya thats the only problem about the board probably gets chipped and beat up easly :(. I would like to try it though since the trucks move differently on a regular longboard. I guess I'll just look for a longboard on sector9 site. Does anyone have this Op Fish Out of Water board?
User avatar
Beachbum
Local Hero
 
Posts: 442
Likes: 0 post
Liked in: 0 post
Joined: Thu Jun 15, 2006 6:05 am
Location: Deep valley of Hawaii

Postby cornishboarder » Fri Jun 30, 2006 8:30 pm

ive not ridden their boards before but i have ridden a wide range of boards and used to compete.
what are you mainly looking for in the board, is it just to practice on when you are not surfing. what sort of riding are you planning on doing on it, are you wanting a board you can go as fast as you can down a hill or are you looking for something to carve around on.
ive ridden a board with very similar truck system to that board, it will turn a lot tighter than a standard skateboard however it will feel really loose and wobbly to ride. if you are looking at geting a board which is like surfing, check out,
http://store.originalskateboards.com/in ... Category=4

ive ridden alot of their boards and they are very similar to surfing, from they way they are designed they look like they will work in the same way as the board your looking at except they are on wood boards which are alot harder wearing.

also have you thought of building your own board you can get a set of those trucks on the op board for $40 and then get the deck and wheel set up you want
cornishboarder
New Member
 
Posts: 11
Likes: 0 post
Liked in: 0 post
Joined: Sun Jan 08, 2006 6:32 pm

Postby tomcat360 » Fri Jun 30, 2006 8:48 pm

The fish out of water is reinforced. Otherwise it would simply break.

However, the OP is a lot of flash...go for praticallity.

And please, understand that there are other options than sector 9. They are so many other great companies out there that are just as competitve in price and higher in quality.

for instance:

www.lushlongboards.com
www.longboardlarry.com
www.raynelongboards.com
www.landyachtz.com

And yes, they are not difficult to make, and is somewhat rewarding, however not as fun as surfboard shaping :D
User avatar
tomcat360
Surfing Legend
 
Posts: 2369
Likes: 0 post
Liked in: 0 post
Joined: Wed May 25, 2005 4:33 pm
Location: Lake Atlantic (VA, USA)

Postby Beachbum » Sat Jul 01, 2006 6:44 am

Ya sorry I didn't know about all the different types of brands since my friends mostly had Sector 9's. I wouldn't mind having a differnt brand but I'm not sure what type of board will be good. I want to learn how to carve better and still able to go down hills around my home. Can someone please help me :D .
User avatar
Beachbum
Local Hero
 
Posts: 442
Likes: 0 post
Liked in: 0 post
Joined: Thu Jun 15, 2006 6:05 am
Location: Deep valley of Hawaii

Postby tomcat360 » Sat Jul 01, 2006 1:18 pm

ah, how did I forget?

The almighty carver:

www.loadedboards.com

The loaded pintail would be great for carving.
User avatar
tomcat360
Surfing Legend
 
Posts: 2369
Likes: 0 post
Liked in: 0 post
Joined: Wed May 25, 2005 4:33 pm
Location: Lake Atlantic (VA, USA)

Postby Beachbum » Sat Jul 01, 2006 7:30 pm

Thanks for the help Tomcat360 but the boards on that site are a bit too expensive hehe :( . I'm still confused on which brand to get since now you guys have showed me other brands then Sector 9. I want to be able to learn how to carve better and still be able to bomb hills.
User avatar
Beachbum
Local Hero
 
Posts: 442
Likes: 0 post
Liked in: 0 post
Joined: Thu Jun 15, 2006 6:05 am
Location: Deep valley of Hawaii

Postby deathfrog » Sun Jul 02, 2006 3:00 am

go for gravity if you're looking for something cheap
arbor is a step up from sector nine, and there's also gf hurley.
comet and motion make boards in the same class as loaded, but they're probally out of your price range.


tomcat makes boards, and so do I, you could order one of ours, he does really nice v-lam boards.

go to www.milehighskates.com and check out their selection, you'll find something you like

or try www.gearguys.com and look at their clearance stuff, they usally have something cheap.
User avatar
deathfrog
SW Pro
 
Posts: 890
Likes: 0 post
Liked in: 0 post
Joined: Thu Aug 12, 2004 9:50 pm
Location: texas

Postby intenso » Sun Jul 02, 2006 7:29 am

I bought a Lush Samba, its the nearest thing I riden that feels surf like.

Not cheap though!


http://www.lushlongboards.com/lush-samb ... -2200.html
intenso
Grom
 
Posts: 29
Likes: 0 post
Liked in: 0 post
Joined: Fri Jun 02, 2006 6:10 am

Postby Beachbum » Sun Jul 02, 2006 8:46 am

That Lush Sumba looks awesome and the peoples reviews say it works well. I guess I could try to tell my parents to get it for me for my birthday and maybe I could pay half hehe :D . I have a question though since the deck of the board is tilited upwards on the nose and back and theres springs located within the board. I didn't ride any type of those boards before and will I be able to learn on it quickly? I want to start carving better since I dont really know how, so will it do the trickand help me powerslide?
User avatar
Beachbum
Local Hero
 
Posts: 442
Likes: 0 post
Liked in: 0 post
Joined: Thu Jun 15, 2006 6:05 am
Location: Deep valley of Hawaii

Postby intenso » Sun Jul 02, 2006 11:11 am

I never ridden a skateboard that can carve as well as the Samba. It turns on a sixpence and you also get a wonderful flex of the board at the same time which is so addictive.

Its an easy board to ride and is very stable. Best part though is the wheels slide so progressively at the back that you get this incredible snowboard type effect that just brings a grin to my face.

This is my favorite longboard but unfortunely its not so great in the skateparks where because of the long wheel base it bottoms out going over transitions. But for carving bowls its the nearest thing to surfing on dry land.
intenso
Grom
 
Posts: 29
Likes: 0 post
Liked in: 0 post
Joined: Fri Jun 02, 2006 6:10 am

Postby tomcat360 » Sun Jul 02, 2006 12:25 pm

The flipped ends act as built in wedges. So instead of wedged riser pads, you've got a wedged board,

Wedges make you turn more/less/more stable. \| |/ is the turniest, which is what this board is.

Originals (the trucks with springs) are a bit of an adjustment, but it's only like 30 minutes and you're back to your regular skating. However, for a first board I wouldn't suggest them. They are great trucks, but I'm not so sure for a beginner.

Instead, you could get Vandals, oops, I mean Randals. But if you wanted some great trucks, get some Crails, and change out the bushings to Tracker Hourglass in something like 85a, and put in a grade 8 kingpin in.

Holey's are also very good. Both are going to cost you though. Randals are probably the best bet if you are trying to save money.
User avatar
tomcat360
Surfing Legend
 
Posts: 2369
Likes: 0 post
Liked in: 0 post
Joined: Wed May 25, 2005 4:33 pm
Location: Lake Atlantic (VA, USA)

Postby deathfrog » Tue Jul 04, 2006 9:40 pm

intenso wrote:I bought a Lush Samba, its the nearest thing I riden that feels surf like.




yeah

how many other boards have you ridden to compare it to
User avatar
deathfrog
SW Pro
 
Posts: 890
Likes: 0 post
Liked in: 0 post
Joined: Thu Aug 12, 2004 9:50 pm
Location: texas

Postby Beachbum » Thu Jul 06, 2006 9:32 pm

Has anyone else ridden the Lush Samba since I think I may purchase that board or does anyone have any other boards in mind? I want other reviews on it since only one person talked about it.
User avatar
Beachbum
Local Hero
 
Posts: 442
Likes: 0 post
Liked in: 0 post
Joined: Thu Jun 15, 2006 6:05 am
Location: Deep valley of Hawaii

Postby tomcat360 » Fri Jul 07, 2006 12:18 am

contact brian@feralarts.com . Tell him that you want a board as surfy as possible, and I promise, I promise it will be the surfiest thing you can find.

That's where it's at. You get a one of a kind board, from an actual person, helping an actual local economy, using actual supplies that are very high quality.

And Brian is great to work with.

Do it!
User avatar
tomcat360
Surfing Legend
 
Posts: 2369
Likes: 0 post
Liked in: 0 post
Joined: Wed May 25, 2005 4:33 pm
Location: Lake Atlantic (VA, USA)

Postby deathfrog » Fri Jul 07, 2006 2:33 am

I couldhook you up with something surfy

like way surfy

like you think your shortboarding
User avatar
deathfrog
SW Pro
 
Posts: 890
Likes: 0 post
Liked in: 0 post
Joined: Thu Aug 12, 2004 9:50 pm
Location: texas

Postby tomcat360 » Sat Jul 08, 2006 1:36 am

what do you have in mind DF?

I haven't particurally tried to make a surfy board, because I don't really ever remember what surfing feels like, if that makes any sense...
User avatar
tomcat360
Surfing Legend
 
Posts: 2369
Likes: 0 post
Liked in: 0 post
Joined: Wed May 25, 2005 4:33 pm
Location: Lake Atlantic (VA, USA)

Postby deathfrog » Sun Jul 09, 2006 12:35 am

27"x7.75 rockered, flat deck, slight kick in tail for barefooting
narrow nose, narrowish side tail with wheel wells, stiff flex
don't try and update my dimensions, this is a gen4 board of this shape and has worked best for what I'm looking for

should have flashbacks in 84 gravity street g's in 81a and narrower trucks, but has s9 nineballs instead for now
tracker darts wedged 7' front and -5 back, khiro white barrel+blue insert top on front with red barrel and red insert top back, rides just like my shortboard

also would work well with tracker rtx/s in 106 with flashbacks 84a, or carver cx but be narrow for the trucks




pic...
Image
Image
User avatar
deathfrog
SW Pro
 
Posts: 890
Likes: 0 post
Liked in: 0 post
Joined: Thu Aug 12, 2004 9:50 pm
Location: texas

Postby tomcat360 » Sun Jul 09, 2006 12:52 am

That's one funky grip. I like it.

After very strictly thinking about what it feels like today surfing, I compared some of my boards when I got home. I've got one, the grunt, which is really surfy. Super flexy, if you ride it back foot heavy it's really surfy. You can get the board and put it on your knee and bend it back into almost a semi circle, but it bounces right back every time. Although kinda cheap, I think the best set up I've done for this is 150 randals and some 65 kyrptos. They are soft, but small enough to do some berts and stuff. Kick tail, no rocker or camber, concaved.

27.5"x9 with 18.5 wheelbase.

I'm making a rockered pin for someone with some glass in it, it should be a good longboard feeling.
User avatar
tomcat360
Surfing Legend
 
Posts: 2369
Likes: 0 post
Liked in: 0 post
Joined: Wed May 25, 2005 4:33 pm
Location: Lake Atlantic (VA, USA)


Similar topics

Return to Surf Chat