by XiloRider » Mon Apr 19, 2021 9:05 pm
by waikikikichan » Tue Apr 20, 2021 7:42 am
XiloRider wrote:The shop was sold out of all the good fins,
by XiloRider » Tue Apr 20, 2021 1:02 pm
waikikikichan wrote:XiloRider wrote:The shop was sold out of all the good fins,
Could you clarify what you mean by that ?
by waikikikichan » Wed Apr 21, 2021 9:51 am
by XiloRider » Wed Apr 21, 2021 1:30 pm
waikikikichan wrote:The fin is on the bottom of your board, you not going to see it. What if the fin was "ugly" but performed so nice, would you use it ?
Could you post a photo of your "Log", that would help to figure what fin would work.
By the way, what fin did the shaper said to use ?
by waikikikichan » Wed Apr 21, 2021 10:07 pm
by XiloRider » Thu Apr 22, 2021 3:18 am
waikikikichan wrote:Damn ! That's sure is a lot of rocker.
If you're going with Rainbow Fin Co. , I would recommend:
1) Mikey Detemple MD3 - because it's most similar to the Greenough 4A fin
2) RFC TK FLEX - I loved that fin for waves we have in Hawaii
3) Any of the "Pivot" style fins will match your Log. But I'm not sure if you can push that type just yet.
by waikikikichan » Thu Apr 22, 2021 7:19 am
XiloRider wrote:I actually just contacted True Ames too. They said "California Classic."
by waikikikichan » Thu Apr 22, 2021 7:32 am
XiloRider wrote:I'd like to try the pivot-type stuff, but...I don't know how to "pivot" LOL
by XiloRider » Thu Apr 22, 2021 1:20 pm
waikikikichan wrote:XiloRider wrote:I actually just contacted True Ames too. They said "California Classic."
Instead of the California Classic, I really like the Farberow Flex. But even better I love the Greenough 4A.
by XiloRider » Thu Apr 22, 2021 1:26 pm
waikikikichan wrote:XiloRider wrote:I'd like to try the pivot-type stuff, but...I don't know how to "pivot" LOL
If you don't know how to do a pivot turn or a drop knee turn, how are you going to turn a "Log" which demands that type of turns ?
Did you let Rainbow Fin Co. know that when they recommended the El Gato ?
by waikikikichan » Thu Apr 22, 2021 8:52 pm
XiloRider wrote:I want to learn how to noseride and all the other basic/traditional longboarding moves.
XiloRider wrote:My understanding is you can still do (weak) "normal" turns. I'll be going mostly down the line at first anyway.
by waikikikichan » Thu Apr 22, 2021 9:27 pm
by XiloRider » Fri Apr 23, 2021 3:57 am
waikikikichan wrote:
Question, how can you get the board going parallel to the wave going down the line when at first your board is pointed to the beach on the take off ? You have to do the firsts of turns, the BOTTOM TURN. Logs can't ( will it's not easy ) turn like how you turn a thruster or 2+1. Even if it was an all-around longboard shape with a single fin, it still takes patience to wait for the fin to load up and release. "Weak" normal turns ? Nope, "Harder" than normal turns especially having to control, sink and engage that wide Log tail.
Don't get me wrong, the advice that Rainbow Fin Co. gave you for the El Gato and Fringe, would probably be a better noseriding fin than the Greenough 4A. But you're not at that level/stage yet. I'm thinking the Greenough will help you with learning the basics of single fin riding and doing pivot turns.
by XiloRider » Fri Apr 23, 2021 4:13 am
waikikikichan wrote:
Notice how they have to Pick up the nose, Pivot off the tail, then Lay the nose back down.
by jaffa1949 » Sun Apr 25, 2021 9:50 am
by XiloRider » Mon Apr 26, 2021 5:55 am
jaffa1949 wrote:IMG_4887.jpeg
Here is a pivot fins to Match any pivot fins around.
3D Printer and modelled after the pectoral fins of a Humpback whale, made by Roy Stewart in New Zealand. Roy BTW ride and makes very long boards from 12ft up, and pushing the performance levels there.
Like all pivot fins, placement in the centre box is as far towards the tail as you can. Notice that this shows my personal sweet spot directly under the rise on the back of the traction pad!
Answer to many surf questions , it is what works for me
42 minutes ago by JamesHsouthaus7 comments
3 days ago by Kulharin3 comments
13 days ago by Swimmy Tim5 comments
14 days ago by BaNZ3 comments
20 days ago by BoMan6 comments
22 days ago by hannaconner5 comments
1 month ago by BaNZ4 comments
1 month ago by HaoleKook4 comments