retro fish boards

All surfing hardware topics here. Boards, leashes, racks, wetsuits, boardies, surfgear, ding repair, wetsuit repair, surf wax...... you get the idea

retro fish boards

Postby surferdude_scarborough » Fri Mar 11, 2005 7:24 pm

may be getting one when i can afford it anyone know how they ride? anyone got one n could give me some tips on what to look for?
User avatar
surferdude_scarborough
Big Wave Master
 
Posts: 1709
Likes: 0 post
Liked in: 0 post
Joined: Mon Dec 01, 2003 7:49 pm
Location: Leeds

Postby deathfrog » Fri Mar 11, 2005 10:58 pm

Well everyone has thier own version of one, but they're all more or less the same...

Skatey, slide out on powerful turns, easy to paddle, and fast...

The retroeyer ones are more of the above, while the more modern ones are just kinda feel like fatter shortboards.
User avatar
deathfrog
SW Pro
 
Posts: 890
Likes: 0 post
Liked in: 0 post
Joined: Thu Aug 12, 2004 9:50 pm
Location: texas

Fish board

Postby fishy frenzy » Mon Apr 25, 2005 11:18 pm

What do you guys think of this board....

Image

It's a phase one from san diego.
fishy frenzy
 
Likes: 0 post
Liked in: 0 post

Postby drowningbitbybit » Tue Apr 26, 2005 4:01 pm

Get a modern hybrid fish with a three fin system... you dont have to use all three if you like it as a twinny, but at least you can :D

Ive got a 'two and half fin' set up on mine, and that seems to work. But it does slide out on turns if Im not paying attention and I dont think I'd fancy it as a twinny.

Other than that, yeah, they're kinda like a fat short board, and with a fat swallow tail they catch more or less anything, almost like a mini-mal. Once you're up and planing, they react (sometimes over-react) to any rider input, which takes a little bit of getting used to.

Loads of fun though, even when the surf is cr@p! :lol:
User avatar
drowningbitbybit
Surfing Legend
 
Posts: 6459
Likes: 0 post
Liked in: 0 post
Joined: Tue Feb 15, 2005 11:16 am
Location: Gold Coast, QLD, Australia.

Postby namino tsume » Thu Apr 28, 2005 6:17 pm

I had a "retro fish" although it was the real thiong. It was from the mid 80's so it was like 3 inches thick,,, and it had about a 5/6 inch swallow tail, with two fins. It was my first board so its tough for me to compare it but, it caught waves beautifully, gave me plenty of speed. I loved it.
User avatar
namino tsume
SW Pro
 
Posts: 523
Likes: 0 post
Liked in: 0 post
Joined: Thu Aug 12, 2004 10:51 pm
Location: connecticut

Postby Brent » Mon May 23, 2005 8:39 am

Hi,
I've got a 5'10" skip fry fish circa 1982 it's a minta and was hardly used when I got it (bought way before they became trendy), it's 21" wide and has 7" between the pins of the swallow tail. It has plywood fins with no cant and almost no toe-in (i.e it's a real fish), I love it for small good waves 1-2 feet and no more, it catches anything and with a wide 15.5" nose I can, if travelling fast enough get 5 toes over the nose...well almost. The best comparision I can say is it's like riding a really short skateboard. Wild crazy fast and fun. But control...na. I just love it for novelty value and I just do carves on it. Cool toy.

I also have two hybrid fish, one a 5'11" 20" wide with 15" nose & tail, it's FCS and I ride this with FCS FG-5 on the outsides with a small GS trailer in the middle. This is my favourite summer board. Better 'surfboard' than the real fish.

I have also another board one inch longer than the above board with all other dimensions identical (but with FCS FG-3 fins and GS trailer)..this is my board I use with a wetsuit (as I'm slightly heavier in a wet wettie I need slightly more volume to compensate) both boards ride identical, summer in boardies on the 5'11" and winter in a 3/2 steamer on the 6'.
Note: this is a good example of getting a good shaper relationship going...you can refine things so much more closely.

Honest; my favouite is the new hybrid fish, it just takes all the good aspects of the old fish and moves it on 20 years...better rails, turns better and is more enjoyable in anything bigger than 1-2 foot waves.

Get a hybrid and run it with a small trailer, make sure it's 20" wide or slightly more and with at least a 14.5" nose...otherwise it's just a short wide shortboard.
If you can afford a real fish as a toy...buy one too you'll love it. But for different reasons. Every surfer should own a real fish at some point in their lives.
Brent
SW Pro
 
Posts: 632
Likes: 0 post
Liked in: 0 post
Joined: Fri Jun 04, 2004 10:07 am
Location: Mount Maunganui, New Zealand

Postby gulfsurfer » Mon May 23, 2005 10:03 pm

I dont like the modern "fish". They shouldnt even be called a fish. Original fish boards are awesome. They are so much fun to ride, i'd get one if i was whoever was talking bout getting one. Dont get that phase one, looks like crap, get one with a big ol' swallow tail.
gulfsurfer
SW Pro
 
Posts: 1058
Likes: 0 post
Liked in: 0 post
Joined: Sun Sep 19, 2004 5:48 pm
Location: TEXAS!!!!!

Postby Brent » Tue May 24, 2005 9:13 am

Um, Gulfsurfer...have you ever even ridden a real fish?
If you had you'd understand my comments above..I know they're romantic & cool at the mo...but really, it's with little actual substance...unless you're a fat 200 pound baby boomer looking for easy paddling & volume (and his childhood)again.
Also, Mark Richards the original user of twin-fins clearly said recently that his design of modern twin-fin (likewise with a removable GS trailer) is a far superior and more versatile board in all areas.

Design moves on. Progress. Likewise owning both types and using them equally I see beauty and fun in each. But the hybrid 5'11" x 20" with 15 nose & tail and the 7" bum split is a better board & real fish in all measurements...it's just fitted with FCS so i can remove the middle fin if desired. that's all.
Brent
SW Pro
 
Posts: 632
Likes: 0 post
Liked in: 0 post
Joined: Fri Jun 04, 2004 10:07 am
Location: Mount Maunganui, New Zealand

Postby gulfsurfer » Tue May 24, 2005 6:20 pm

Yes, i have ridden a real fish, i just ordered a new one a week ago.
gulfsurfer
SW Pro
 
Posts: 1058
Likes: 0 post
Liked in: 0 post
Joined: Sun Sep 19, 2004 5:48 pm
Location: TEXAS!!!!!

Postby Brent » Wed May 25, 2005 5:43 am

Cool. what size. How long??
Wooden or glass fins?
Brent
SW Pro
 
Posts: 632
Likes: 0 post
Liked in: 0 post
Joined: Fri Jun 04, 2004 10:07 am
Location: Mount Maunganui, New Zealand

Postby gulfsurfer » Wed May 25, 2005 5:43 pm

The only dimension i know is that its going to be 5'9. Mike said he'd get all the rest down, and hes an awesome shaper, so i know itll be sweet. Wood fins.
gulfsurfer
SW Pro
 
Posts: 1058
Likes: 0 post
Liked in: 0 post
Joined: Sun Sep 19, 2004 5:48 pm
Location: TEXAS!!!!!

Postby Guest » Wed May 25, 2005 6:10 pm

cool. good length, some go too short I reckon, 5'6" for example is too short...unless you're a gnome or 11 years old...
Wooden fins are the coolest also, make sure you look after them though won't you. If you bang them up hard & break the fiberglass layer protecting them they'll get waterlogged & go a dark colour (and rot too) :-(
Let me know when you get it

Brent (duh forgot to log in didn't I)
Guest
 
Likes: 0 post
Liked in: 0 post


Similar topics

Return to Surfing Hardware