Surfing Waves

so i bought and old dinged up short board and i need to fix it what do i need to get to fix it??

the nose is chiped pretty bad and so is the tail( its a small fish tail ) and theres a couple of presure cracks on the rails and on the bottom.

so what do i get and how much would i need, also the cost of it would be nice.

epoxy, glass mat, and resin. You must select the resin according to whether your board was glassed with epoxy resin or polyester resin.
Quantity based on provided info: not much of any of these things
Cost based on provided info: $40 to $80 US

You will need to determine if your board is polyester, or epoxy this will determine the kind of repair kit you will need to buy. You will need to get some resin with hardener, fiberglass cloth, Q-cell (resin additive to make a filler), sandpaper, masking tape, and some mixing cups. The cost varies and sometimes you can buy a large size repair kit with most everything needed, including directions. Since you are new to this I would go the kit route. Remember even if you mess up you can always sand it down and try again. Try to read the instructions really well and it can save you a lot of time. You will probably spend between $15-$25. Good Luck!

thanks tony, and update on board: its a old channel islands flyer II 6'6", thats all i know right now.