by dtc » Wed Mar 30, 2016 10:31 pm
Agree with Surf Hound as well. Around 8ft would be about right - if you go too big (like over 9ft) you might find it hard to handle the size/weight in the surf given your weight. There is no single brand or anything that is particularly better than another. Beginners are often recommended epoxy boards, which are harder to damage and are also lighter, so that may be something for you to keep in mind. However, a traditional PU board wont be a bad choice either.
Wavestorm would also be a good choice - should be useful for your first 6-12 months at least (depending on how often you surf), by which time you will have a better idea of what you want and don't want; and they are nice and cheap relatively speaking
So length 8ft to 8ft6
width say 21 to 23 ish inches (not too wide because you may not have the shoulder width to get your arms out far enough to paddle easily; but not below 21 inches)
thickness - probably not too important because most boards with the length and width will be fine thickness wise, but lets say 2 5/8 inches thick or thereabouts. I would try to avoid boards over 3 inches thick simply because you don't need that much volume; but even 2 1/2 inches thick is fine (note: the wavestorm/foam boards will be over 3 inches thick - that's fine because they are made of different material; but for a 'hard board' stay under 3 inches)
Get a longboard shape (this really means that the rails (edges) around the middle part of the board are parallel or almost parallel to each other, rather than being a continuous curve; and that the nose is more rounded than pointed).
Fins - 1 or 3, doesn't really matter.
Lessons - highly recommended, even if its just for a couple of hours
Persistence in the face of seemingly never being able to quite make the next step - necessary
Enjoyment - just comes naturally, no need to work on that!