Page 1 of 1
Stomp pad removal on epoxy
Posted:
Thu Nov 16, 2006 10:19 pmby Guitarandsurf92
Hey guys im am about to get a nice used Epoxy Al merrick 6'8" Flyer. It has a stomp pad and a front foot pad. i wanted to know if i took of the front foot pad (becasue it gives me a rash) will it seperate the epoxy from the foam or do any damage?
Posted:
Fri Nov 17, 2006 2:31 pmby Dec
If you use a decent removant luquid (I don't know the name, but loads of people on here do) it shouldn't damage the board in anyway.
PS. Have you tried a rash vest?
Posted:
Sun Nov 19, 2006 1:23 pmby Guitarandsurf92
ok thanks. yes i do use a rash guard. but thats not the only reason i dont want it there. the person who had this board before me must have had a smaller base than i do and my leg goes over it and it just doesnt feel right.
Posted:
Mon Nov 20, 2006 1:42 amby Guitarandsurf92
ok i got the board and i took the front deck grip off. but there is still the sticky residue. how do i get it off without damaging hte epoxy?
Posted:
Mon Nov 20, 2006 11:11 pmby Guitarandsurf92
any one? will Windex work, its ammonia free
Posted:
Tue Nov 21, 2006 8:09 amby drowningbitbybit
White spirit. A SMALL amount and a scoury sponge (gently!) will do the job
Posted:
Tue Nov 21, 2006 10:14 amby Johnny B
For a cheaper option, the juice of a lemon should do the trick!
And...err...if it doesn't work it hasn't cost you a fortune and your board will smell lemony fresh!
Posted:
Tue Nov 21, 2006 10:50 amby drowningbitbybit
John_boy wrote:your board will smell lemony fresh!
But I like the smell of white spirit...
Posted:
Tue Nov 21, 2006 12:15 pmby libby
You should marry i'dratherbe
Posted:
Tue Jan 09, 2007 3:59 amby Fishsandals
i would use Goof-off..
it works for pretty much everything, stickers and such, so
should work for the residue. i dunnow, it's worth a try.