Page 1 of 1

What do you guys know about this board?

PostPosted: Tue May 02, 2006 3:29 pm
by emil
Can you guys help me out with this one?
I don´t know much about it except that i was bought i Brazil about four years ago.
What do you know about the brand? Good/ bad?
Is it worth anything? It´s in pretty good shape.


Image

Image

Image


Thnx, Emilio[/img]

PostPosted: Tue May 02, 2006 10:21 pm
by deathfrog
if it's watertight
symetrical rails
not all dinged



it's a good board
brand doesen't matter


if you were selling it, try 300ish, if it's clark (which I doubt bc it's from brazil)
keep it and sell it for more later

PostPosted: Wed May 03, 2006 12:59 am
by tomcat360
kinda looks like the left side of the deck is rather pressure dinged--any pictures showing how smooth (or not smooth) the surface is?

PostPosted: Wed May 03, 2006 8:49 am
by emil
Sweet. Thanks for the help. Don´t know anything about surfing. I´m from Sweden so for me it´s all about Snowboarding.
But i´m hopfully of to Bali for a few week this summer so i´m going to give it my all.

This was the best that i could do with the pics. Only got my mobilephone to take the pictures with.
There is still quite alot of wax on it.


Image

Image

Image

PostPosted: Thu May 04, 2006 3:13 pm
by mrc
Looks alright !!any major dings or repairs ,also make sure its water tight.
If this is your first time on a surfboard it maybe abit small although you can hire a larger board for a few days on Kuta beach no prob.
Started surfing there myself about 4 years ago great spot of back in July for a month.

PostPosted: Fri May 05, 2006 2:37 pm
by Driftingalong
Looks like it would be a difficult board to start on....good looking board though!

PostPosted: Fri May 12, 2006 3:38 pm
by CheeZee
looks like someone has been kneeling on it a lot out of the water ..tsch tsch ... :wink:

PostPosted: Fri May 12, 2006 5:26 pm
by GowerCharger
looks light, the dings will be from using lighter cloth on the deck to keep weight down.
Look at the underside of the board, down towards the fins there should be some writing along the centreline of the board. Should tell you the length, width and thickness and possibly the name of the shaper.