Adding fins?

All surfing hardware topics here. Boards, leashes, racks, wetsuits, boardies, surfgear, ding repair, wetsuit repair, surf wax...... you get the idea

Adding fins?

Postby GrandRoyale » Fri Feb 24, 2006 1:57 am

I got a pretty newb question since i am an newb to surfing.... anyway heres my delema (if thats how u spell it) i bought a really cheap board of my friend for 30 buks its pretty old, its also a short board with one fin... and everyone tells me that surfing one fin on a short board is tough and since i havent gone b4 i was wondering if you can add fins (probably 2 to make it 3 obviously...) and if you can how much would it cost. Thanks in advance.
GrandRoyale
New Member
 
Posts: 7
Likes: 0 post
Liked in: 0 post
Joined: Fri Feb 24, 2006 1:39 am

Postby EastCoast4Life » Fri Feb 24, 2006 12:12 pm

one fin on a shortboard? this must be and old board....i dont know for sure but it ill take a stab at it.... what type of fins are we talkin about FCS? Fiberglass? either way its gona take sanding down install a repaint and reglass and thats even if they can do that
EastCoast4Life
Local Hero
 
Posts: 110
Likes: 0 post
Liked in: 0 post
Joined: Tue Jan 03, 2006 5:09 am
Location: Wilmington, NC

Postby drowningbitbybit » Fri Feb 24, 2006 1:10 pm

Wouldn't bother - if you've never surfed, an old single fin shortboard is about the worst choice of board you could have :?

Go surfing on a beginner-friendly hired board a couple of times, and see what you think of surfing (if you dont love it, then begone and never come back) :wink:

But for the record - it is possible to add fin boxes to boards (Im assuming the single fin is glassed on, if its an old board? ) but you'd probably need to get it done professionally, and while it wouldnt be all that expensive, its probably not worth it for a cheap old board.
User avatar
drowningbitbybit
Surfing Legend
 
Posts: 6459
Likes: 0 post
Liked in: 0 post
Joined: Tue Feb 15, 2005 11:16 am
Location: Gold Coast, QLD, Australia.

Postby IslandA » Sat Feb 25, 2006 12:45 am

Yeah rent a wide thick board for a while. You got a smoken deal on that board!!! about your dilema, yes single finners are hard to learn on but so can thrusters too(especially if they are too small for you), they generate much power through the fins and this would leave you drinking lots of salt water. A single fin funboard or longboard is good to learn on for sure! You shouldnt hack up the mono fin, put it away until ready to surf it. They have a knarly feel to them that you have to appreciate
IslandA
Grom
 
Posts: 32
Likes: 0 post
Liked in: 0 post
Joined: Fri Jan 13, 2006 4:09 pm
Location: Nova Scotia

Postby GrandRoyale » Sat Feb 25, 2006 1:12 am

ok thanks for the input i guess ill need to get a new board :roll:
GrandRoyale
New Member
 
Posts: 7
Likes: 0 post
Liked in: 0 post
Joined: Fri Feb 24, 2006 1:39 am

Postby deathfrog » Sat Feb 25, 2006 5:51 am

well duh if you're gunna add more EVERYONE knows MORE is BETTER




don't just add two add like 10 dude
User avatar
deathfrog
SW Pro
 
Posts: 890
Likes: 0 post
Liked in: 0 post
Joined: Thu Aug 12, 2004 9:50 pm
Location: texas

Postby tomcat360 » Mon Feb 27, 2006 1:35 am

you could sell it to me for 35 and then you'd make 5 bucks-----

--or, you could learn to ride a single fin the right way. go look at rob machado.
User avatar
tomcat360
Surfing Legend
 
Posts: 2369
Likes: 0 post
Liked in: 0 post
Joined: Wed May 25, 2005 4:33 pm
Location: Lake Atlantic (VA, USA)


Similar topics

Return to Surfing Hardware