Page 1 of 1

Can you tell me about my board?

PostPosted: Wed Aug 10, 2016 7:03 am
by beachmike2
Hi there

I own this board (see bad :-) picture attached). It is made by Rip Curl but that's about all I know. I bought it from a guy here in Switzerland who imported it from Australia but I don't know when and how much he paid back then. What I would like to know is the following:

- What kind of board is it?
- Is it rare?
- What is its value today?

I tried to find similar boards on eBay etc. but I could't find any information about it, this is what made me think I might have a little treasure in my basement. The board seems to be untouched, I think it has never been used, there are no scratches or dints.

Thank you for your help.

Re: Can you tell me about my board?

PostPosted: Wed Aug 10, 2016 9:23 am
by jaffa1949
I know the Aussie Rip Curl guys , but a couple more and better photos will help the set up of the fins underneath would help. The picture nor the nose of the board may help too.
The board is probably a promotional wood and EPS type, there may be other names underneath .

Rarity to be determined , but certainly a unique board in Switzerland. Hang on a little searching will happen here!

:D

Re: Can you tell me about my board?

PostPosted: Wed Aug 10, 2016 9:49 am
by waikikikichan
Did you buy this exact board ?

918707.jpg


918710.jpg
918710.jpg (27.86 KiB) Viewed 593 times


http://gratis-zoekertjes.onlinertjes.be/d-1335/364179/wooden-rip-curl-longboard.html

Re: Can you tell me about my board?

PostPosted: Wed Aug 10, 2016 10:06 am
by waikikikichan
beachmike2 wrote:this is what made me think I might have a little treasure in my basement.


Most likely it's a wood veneer board. It's reminds me of the old Surftech boards Molded EPS/Epoxy construction. The top layer although, was a cheater coat of polyester resin which they polish up nicely. But those Surftech "woodies" were made at the Cobra factory in Thailand. I think yours might be made in China.

So sorry to break the bad news, but it's not worth a fortune. More like $871.64.

Re: Can you tell me about my board?

PostPosted: Wed Aug 10, 2016 10:11 am
by jaffa1949
Bingo that's it ! Beat me to it Wikichan for this one, Waikikikichan!
All information correct as is value! The further from the sea the better it will look!

Re: Can you tell me about my board?

PostPosted: Wed Aug 10, 2016 10:25 am
by waikikikichan
I had a Woodie David Nuuhiwa 9'8" Noserider. If you couldn't nose ride that board, you just couldn't nose ride. But I sold it because of all the Spider Web cracks on the cheater coat. The Tuflite painted boards stood up to more bumps than the woodies did. But they sure look nice new.

Re: Can you tell me about my board?

PostPosted: Wed Aug 10, 2016 11:48 am
by beachmike2
Hi guys

Thanks a lot for your feedback. My board looks exactly like the one on the picture except the wood on top is a bit darker but the patterns and logos are identical.

800 bucks plus is more than I expected, I paid 300 for it so looks like I made a good deal!
And if I ever want to use is it will be good enough for my skills I think.

greetings from switzerland