tail repair lost puddle jumper

All surfing hardware topics here. Boards, leashes, racks, wetsuits, boardies, surfgear, ding repair, wetsuit repair, surf wax...... you get the idea

tail repair lost puddle jumper

Postby jyar » Tue Sep 15, 2020 7:30 pm

Unfortunately I dropped my Lost puddle jumper and have damaged the tail... I am asking for advice on repair. surf is great for the next few days. can i surf with it, am I better taken for repair or doing my best with epoxy?
Attachments
20200915_104310.jpg
20200915_104312.jpg
20200915_104320.jpg
jyar
New Member
 
Posts: 2
Likes: 0 post
Liked in: 0 post
Joined: Tue Sep 15, 2020 7:23 pm

Re: tail repair lost puddle jumper

Postby dtc » Tue Sep 15, 2020 10:45 pm

You need to repair it but if you are pressed for time you can either (a) do a quick a dirty repair (eg solarez along it all), but you will have to spend a bit of time undoing that before doing it properly or (b) run the risk by taping it up with some gorilla tape and cover that with wax.

(A) is preferable, although it ends up being more work in the long run it wont run the risk of permanent term damage. It will only take 1/2 hour including drying time and some sanding time. Or you can do both - solarez where the obvious holes are and then tape up the whole area

Obviously properly repairing it is the best option but that is a bigger job, looks like you will need to cut away some of the fibreglass and redo it.
dtc
Surf God
 
Posts: 3833
Likes: 0 post
Liked in: 0 post
Joined: Mon May 21, 2012 4:58 am

Re: tail repair lost puddle jumper

Postby waikikikichan » Wed Sep 16, 2020 2:40 am

1) How do you know it’s Epoxy/EPS and not Poly/PU ?
What does your order form say ?

2) So if you do surf it, what do you think will happen ?
User avatar
waikikikichan
Surf God
 
Posts: 4783
Likes: 0 post
Liked in: 0 post
Joined: Mon Sep 01, 2014 11:35 pm
Location: Tokyo, Japan

Re: tail repair lost puddle jumper

Postby jyar » Wed Sep 16, 2020 6:48 am

Thanks for reply

yesnits Pu/foam but question was whether epoxy would seal it temporarily to prevent water ingress
jyar
New Member
 
Posts: 2
Likes: 0 post
Liked in: 0 post
Joined: Tue Sep 15, 2020 7:23 pm


Similar topics

Return to Surfing Hardware