Waxing

All surfing hardware topics here. Boards, leashes, racks, wetsuits, boardies, surfgear, ding repair, wetsuit repair, surf wax...... you get the idea

Waxing

Postby LucasG » Tue Aug 12, 2008 9:29 pm

So I got my first board today. Didn't do the greatest job at waxing but it was decent to surf, even though after a while it felt like some of the wax was kind of coming off, unfortunately when I applied the wax I didn't have anywhere else to do it but my car and kinda under the sun. I am home now and want to fix this wax coating.

I purchased 2 types of Mrs Palmers (Ultra Sticky). Base Coat and Tropical water surf wax.

I spoke with the guy at the surfshop and I think I understood him to not mix them up. But I am not completely sure (not sure why I didn't re-confirm with him). The thing is I applied the base coat already. Should I completely apply the base coat without the tropical water surf wax or the base coat and then some tropical water surf wax?
LucasG
Local Hero
 
Posts: 157
Likes: 0 post
Liked in: 0 post
Joined: Fri Jul 18, 2008 6:43 pm
Location: Jacó, Costa Rica

Postby Rico » Tue Aug 12, 2008 9:31 pm

no award winning why it is called base coat...

apply base and then top wax the whole thing

start with lots of pressure and then less with every layer, should work
User avatar
Rico
Local Hero
 
Posts: 151
Likes: 0 post
Liked in: 0 post
Joined: Mon Apr 07, 2008 8:15 am
Location: Gold Coast, Australia

Postby LucasG » Tue Aug 12, 2008 9:34 pm

Rico wrote:no award winning why it is called base coat...

apply base and then top wax the whole thing

start with lots of pressure and then less with every layer, should work


That's what I thought. I just wasn't completely sure. Thank you!
LucasG
Local Hero
 
Posts: 157
Likes: 0 post
Liked in: 0 post
Joined: Fri Jul 18, 2008 6:43 pm
Location: Jacó, Costa Rica

Postby RJD » Tue Aug 12, 2008 10:56 pm

Base coat will be tougher but less sticky, gives the top coat something to grip on.

Oh for being able to use 'Tropical' topcoat rather than 'cool' ore 'cold' :D
RJD
SW Pro
 
Posts: 1373
Likes: 0 post
Liked in: 0 post
Joined: Mon Dec 05, 2005 7:37 pm
Location: Christchurch, New Zealand

Postby Rico » Tue Aug 12, 2008 11:03 pm

yeah I had to discipline myself not to comment on the tropical wax :evil: :wink:
User avatar
Rico
Local Hero
 
Posts: 151
Likes: 0 post
Liked in: 0 post
Joined: Mon Apr 07, 2008 8:15 am
Location: Gold Coast, Australia

Postby LucasG » Tue Aug 12, 2008 11:42 pm

RJD wrote:Base coat will be tougher but less sticky, gives the top coat something to grip on.

Oh for being able to use 'Tropical' topcoat rather than 'cool' ore 'cold' :D


The surf shop guy says he doesn't really use base coat, he just directly uses the top coat to have it more smooth I guess. I have now applied the base coat and top coat, looks good to me. :) Will try it out tomorrow.
LucasG
Local Hero
 
Posts: 157
Likes: 0 post
Liked in: 0 post
Joined: Fri Jul 18, 2008 6:43 pm
Location: Jacó, Costa Rica

Postby scsurf » Sun Aug 17, 2008 5:16 am

Sounds like you've got it. but just a tip, wax is best applied when cool.
If you're on the beach, you can dip your board in the water and apply it right away or even in the water.
User avatar
scsurf
Local Hero
 
Posts: 168
Likes: 0 post
Liked in: 0 post
Joined: Wed May 21, 2008 5:42 am
Location: San Clemente, California

Postby justloafing » Sun Aug 17, 2008 10:48 am

When using tropical wax I usually do not worry to much about a base coat. Tropical wax is a pretty hard wax I will use the tropical as a base coat when the water gets cooler because the cooler waxes really do get soft and move around on your board. I don't know why the guy at your surfshop wants a smoother surface?
justloafing
SW Pro
 
Posts: 590
Likes: 0 post
Liked in: 0 post
Joined: Sat Oct 07, 2006 4:37 pm
Location: Wailuku, HI

Postby LucasG » Sun Aug 17, 2008 1:00 pm

scsurf wrote:Sounds like you've got it. but just a tip, wax is best applied when cool.
If you're on the beach, you can dip your board in the water and apply it right away or even in the water.

That's what I've seen recently, I'm trying that out. Thanks!

justloafing wrote:When using tropical wax I usually do not worry to much about a base coat. Tropical wax is a pretty hard wax I will use the tropical as a base coat when the water gets cooler because the cooler waxes really do get soft and move around on your board. I don't know why the guy at your surfshop wants a smoother surface?

I guess so it is not as hard as it is with the base coat. I might also try simply using the tropical wax as I've kinda been feeling the currently wax I have is kinda hard and a little uncomfortable sometimes.
LucasG
Local Hero
 
Posts: 157
Likes: 0 post
Liked in: 0 post
Joined: Fri Jul 18, 2008 6:43 pm
Location: Jacó, Costa Rica

Postby Eooon » Thu Aug 21, 2008 11:32 am

from one thing to another, do you put the wax just where your front and back leg are when standing up or the entire "backside" of the board?

I just bought my first board yesterday, a 7'6, and desided to try it in the water without waxing it first. (just to understand what the diffrence was)

Needless to say, it was very slippery. Often when paddling into the waves my upper body would just slide right off.

So, I assume you wax a large portion of the backpart for tracking when paddling as well?
Eooon
New Member
 
Posts: 2
Likes: 0 post
Liked in: 0 post
Joined: Mon Aug 18, 2008 5:44 pm

Re: Eooon

Postby LeeM » Thu Aug 21, 2008 1:59 pm

Depends a lot on your board.

For my short(er) board (7'2") I wax from midpoint to tail. Once you have surfed it a while, you can see where your feet go. Wax about a foot forward of your front foot, or you will slip off badly. For a longboard, I wax pretty heavily the back 2/3rds of the board, then a light wax on the nose in case I develop some spontanious miracle talent and get up there.
LeeM
New Member
 
Posts: 15
Likes: 0 post
Liked in: 0 post
Joined: Tue Apr 08, 2008 7:31 pm
Location: Tybee Island

Postby LucasG » Thu Aug 21, 2008 4:00 pm

Eooon wrote:from one thing to another, do you put the wax just where your front and back leg are when standing up or the entire "backside" of the board?

I just bought my first board yesterday, a 7'6, and desided to try it in the water without waxing it first. (just to understand what the diffrence was)

Needless to say, it was very slippery. Often when paddling into the waves my upper body would just slide right off.

So, I assume you wax a large portion of the backpart for tracking when paddling as well?


You should wax most of your 7'6" imo, you can't surf without waxing it unless it's a softtop. I wax mine from where the leash starts to about 3/4 of the board, just leaving a little bit unwaxed at the front of the board. Just in case I want to go a little to the front and whatnot.
LucasG
Local Hero
 
Posts: 157
Likes: 0 post
Liked in: 0 post
Joined: Fri Jul 18, 2008 6:43 pm
Location: Jacó, Costa Rica

Re: Eooon

Postby justloafing » Thu Aug 21, 2008 4:48 pm

LeeM wrote:
then a light wax on the nose in case I develop some spontanious miracle talent and get up there.


:lol: Hahahahahahahaha That is why I wax my board heavy all the way to the nose. If I ever get there I want to stick
justloafing
SW Pro
 
Posts: 590
Likes: 0 post
Liked in: 0 post
Joined: Sat Oct 07, 2006 4:37 pm
Location: Wailuku, HI


Similar topics

Waxing a foam top?
RELATED: Surfing Hardware
Author: LittleSkink
Replies: 5
Waxing your board
RELATED: Surf Chat
Author: Brian
Replies: 11
Waxing Surfboard
RELATED: Surfing Lessons For All
Author: doebrowns
Replies: 2
Return to Surfing Hardware