There's this board which is 6'8" x 19.75" x 2.625"
And this board which is 6'6" x 19.5 x 2.5"
The first board is $200; the second one is $100. The only difference I see is the fuller, wider nose. Opinions?
by undergroundthry » Tue Jun 08, 2010 10:52 pm
by Jonny_H » Wed Jun 09, 2010 12:23 am
by drowningbitbybit » Wed Jun 09, 2010 1:50 am
by undergroundthry » Wed Jun 09, 2010 4:55 pm
Jonny_H wrote:Hi - For what its worth here is my 'transition' ....
Started surfing 8 months ago on a 7'2" Hybrid Funboard.
6 Months later I supplemented this with a Miller V-Skate, 6'6" x 20 3/4 x 2 3/4
The step down to this board was quite noticeable (needed to paddle much harder etc), but wasn't too bad due to the volume of the 6'6 being quite high.
The Miller snapped in 4-5ft sets last weekendso I have just bought an Aloha AF2 Turbo, 6'6" x 19 1/2 x 2 1/2 - this is a big change from the Miller despite being the same length as it has much less volume in the nose, is noticeably thinner and quite a bit narrower. I honestly believe I would have struggled to go to this straight from the 7'2
(Incidentally I surf every morning for about an hour - sometimes get an afternoon session in too!)
Looking at your pics ... The first board does appear to have much more volume in the nose, but is also wider and thicker. I would say this would be the best of the two for you. Also, coming from a 7'8 is a big jump - have you considered moving to a 6'10 as an interim?
The second board still carries its width quite far forward, but being narrower and thinner will have less volume overall.
Personally, if these are the only two options I would go for the first one, however I would also think about trying one before you buy it to see how it feels and maybe looking for a 6'10 or simalar as a step-down board.
Finally - what kind of waves are you surfing and how often as this will have an impact too. The second board looks like it may be better in bigger waves and the first board would be a good board for 2 ft grovelling days! (Although you really need to look at the rocker too when thinking about board shape for waves)
Hope this helps!
Jonny
by undergroundthry » Thu Jun 10, 2010 4:13 pm
by Aloha » Fri Jun 11, 2010 7:46 am
Jonny_H wrote:The Miller snapped in 4-5ft sets last weekend![]()
by Jonny_H » Mon Jun 14, 2010 10:53 pm
18 hours ago by JamesHsouthaus5 comments
3 days ago by Kulharin3 comments
13 days ago by Swimmy Tim5 comments
14 days ago by BaNZ3 comments
19 days ago by BoMan6 comments
22 days ago by hannaconner5 comments
1 month ago by BaNZ4 comments
1 month ago by HaoleKook4 comments