Surfboard question

The shortboard only forum.

Surfboard question

Postby shallows09 » Sun Apr 26, 2009 5:39 am

heya. I am fairly new to surfing & I use to ride a 6'6-20-29/16, thruster, but it snapped recently. I found it pretty easy to ride and get up on. I have since bought a second hand 6'3 thruster and it is considerably thinner on the rails and narrow width wise. Im 6'3 and weigh around 83kgs. I took it out for a surf the other day, and found it extremely slower and harder to get onto waves. Have I bought a stupid buy or should i just be able to adapt to it?
shallows09
New Member
 
Posts: 2
Likes: 0 post
Liked in: 0 post
Joined: Sun Apr 26, 2009 5:24 am

Re: Surfboard question

Postby RJD » Sun Apr 26, 2009 8:51 am

Sounds like the new board has a lot less volume.
RJD
SW Pro
 
Posts: 1373
Likes: 0 post
Liked in: 0 post
Joined: Mon Dec 05, 2005 7:37 pm
Location: Christchurch, New Zealand

Re: Surfboard question

Postby esonscar » Sun Apr 26, 2009 9:01 am

Hey '09 - post up the thickness and width so we can advise you better.

It does sound like you will have to raise your game a bit on the new board though - catching waves with one or two strokes instead of the dozens you maybe used to take.

My avatar board is 6’2” x 19 ¾ by 2 I think – it’s a board for surfing and not a plonkie around in the sea board.

This sounds like the new board you have.

Persevere for a bit, or to keep the stoke go a bit thicker ?

Let us know dude.
User avatar
esonscar
SW Pro
 
Posts: 923
Likes: 0 post
Liked in: 0 post
Joined: Fri Jul 25, 2008 9:16 am
Location: Swansea, Wales, UK

Re: Surfboard question

Postby IB_Surfer » Sun Apr 26, 2009 4:13 pm

83kg = 182lbs - I weigh between 190 - 200lbs depending on lifestyle, go-outs, excercise...

All my shortboards are 2 1/2 inches thick. About 4 years ago I had a 6'3" made 2 3/8" thick and boy I felt the difference. I could ride it, no problem, and maybe if I had stuck to it I would have gotten used to it, but my wave count went down as did my enjoyment. That is when I decided that I had reached my plateau on ability and equipment. Since then I have gotten eveything slightly thicker and been in love with it.

If you want a recommendation, I had a board shaped like the Xanady Rocky, tick to rails but hard rails, love the glide, it's both an awesome wave catcher and great performer. They did not come in a 6'3" so I had a local shaper make it for me, but totally dig it.
User avatar
IB_Surfer
Surfing Legend
 
Posts: 3106
Likes: 0 post
Liked in: 0 post
Joined: Sun Oct 05, 2008 3:00 am
Location: San Diego, CAlifornia

Re: Surfboard question

Postby shallows09 » Mon Apr 27, 2009 6:42 am

thanks for the help. the dimension is 6'3x18.1/4 by 2. 9/16. I did notice that it took 3 real powerful strokes to get onto a wave instead of the many less powerful ones i used with the 6'6er.

That avatar sounds more or less the same except its and inch and a bit wider, and less thick.

thanks mathteacher, i will have a look into it. the only reason why i bought this board so haphazardly was because i snapped that 6'6er in the surf the other day, and was sooo keen to get back out there. but as soon as i took it out, I immediately felt the the huge contrast between both boards.. might go out with it a couple more times and if I get no joy, I will try and sell it and wait for something else
shallows09
New Member
 
Posts: 2
Likes: 0 post
Liked in: 0 post
Joined: Sun Apr 26, 2009 5:24 am


Similar topics

Return to Shortboarders Only