How to rip in small waves

The shortboard only forum.

How to rip in small waves

Postby surf904 » Sat Aug 01, 2015 9:21 pm

Hey just got back from a surf an the waves were pretty small. I realized I could only get about one SLOW turn in and had no speed what so ever. Here is a link to show about how big the waves were http://stabmag.com/how-to-surf-small-wa ... he-andino/ and how i want to surf them. How does kolohe have so much power in such small waves?
surf904
New Member
 
Posts: 16
Likes: 0 post
Liked in: 0 post
Joined: Wed Jul 08, 2015 11:08 pm

Re: How to rip in small waves

Postby drowningbitbybit » Sat Aug 01, 2015 11:05 pm

surf904 wrote:How does kolohe have so much power in such small waves?

By being very very skilful. Weighing about as much a piece of toast will help too, but most just being very skilful.
He's constantly right in the pocket, sucking every bit of power out the wave. And the board is always light on the water... he never digs a rail in deep or lets the tail sink.

Stay in the pocket. Pump for speed from the top of the wave. Generate as much speed as you can before turning. Don't dig in.

...all very easy in theory, but takes a lot of skill in practise.
You'll probably find me surfing, but if not, I'll probably be in the photography studio
User avatar
drowningbitbybit
Surfing Legend
 
Posts: 6459
Likes: 0 post
Liked in: 0 post
Joined: Tue Feb 15, 2005 11:16 am
Location: Gold Coast, QLD, Australia.

Re: How to rip in small waves

Postby oldmansurfer » Sun Aug 02, 2015 1:04 am

He uses his weight by dropping down into the bottom turns once he gets moving it is transferring that momentum by changing directions carving turns and unweighting and weighting. You never know but some small waves have some power and are easier to ride. Some of those look like they might. There was some QS pro contest a while back I think the Balito pro where that's how big the waves were and they were all shredding them.
So what is worse.... dying or regretting it for the rest of my life? Obviously I chose not regretting it.
User avatar
oldmansurfer
Surf God
 
Posts: 8193
Likes: 0 post
Liked in: 0 post
Joined: Mon Aug 12, 2013 9:10 pm
Location: Kauai

Re: How to rip in small waves

Postby waikikikichan » Sun Aug 02, 2015 1:14 am

What you don't want to hear - It's because Kolohe is a Pro. So is Tiger, so MJ. They make it look easy. They put in their time. They understand not only the How ( pumping and displacement ) but the When ( too resist and when to relax ) and the Where ( being in the pocket, in the most powerful part of the wave ). As you spend more time surfing, you will get better at understanding the wave. That's where true speed comes from.

masterand beginner11209572_10153126517528165_152559447556454253_n.jpg
masterand beginner11209572_10153126517528165_152559447556454253_n.jpg (36.67 KiB) Viewed 1436 times
User avatar
waikikikichan
Surf God
 
Posts: 4783
Likes: 0 post
Liked in: 0 post
Joined: Mon Sep 01, 2014 11:35 pm
Location: Tokyo, Japan

Re: How to rip in small waves

Postby oldenglish » Sun Aug 02, 2015 4:59 am

I'm assuming your in Jax with the 904 in your name. Pretty weak little bump we had. It also never had the form or shape of those waves. Regardless, like everyone else said, he's a pro. Something to be said about riding a more high performance thruster style of board in mediocre waves is that it doesn't outrun the power source and is easy to keep in the pocket while flatter more fish like boards aren't the easiest to keep in the pocket since they constantly accelerate away.

Where do you surf usually? Not all sand bars are created equal. Some spots are grovable on shin to knee while others you might be lucky to catch the wave at that size.
oldenglish
Local Hero
 
Posts: 109
Likes: 0 post
Liked in: 0 post
Joined: Wed Aug 10, 2011 3:38 am

Re: How to rip in small waves

Postby surf904 » Sun Aug 02, 2015 10:45 pm

Yep mostly surfing jax beach. Granted im not a pro and the waves might suck i still want to be a standout in are waves. Thanks for the replys
surf904
New Member
 
Posts: 16
Likes: 0 post
Liked in: 0 post
Joined: Wed Jul 08, 2015 11:08 pm

Re: How to rip in small waves

Postby jaffa1949 » Mon Aug 03, 2015 1:37 am

Realistically if you want to stand out , you need to be outstanding ( like duh) .
You are only a couple of years into your surfing ,so beginner still, like I said in the other post .
Surf surf and surf, sadly your video is no longer available ( you might want to repost it)
so no critique can be done.
First step however is to really get your basic surfing working well, pushing each element in ever increasing power and strength, learn where the power is in the wave, learn how to make it into speed and how your positioning on your board effects that.
for a short board learn front and back foot weighting and unweighting to gain drive, (front foot) or power up a turn (Back foot).
Learn how to use torque from your body to wind up a turn and then eyeballing where you are going to go as you come out of that turn
Spend a good bit of time watching how the good guys work to small waves, try to do the same as the ones who are most successful.

Remember too that by and large most of us will only reach the upper end of a good average.
Outstanding athletes are that way because they built their skills on their innate ability ,drive and competitiveness.
If that is you, then surf surf and surf will make you outstanding.
In one of your post you said you were having a blast, and that is really the only way to go :!: :lol:
I've taken up troll hunting just for fun, instead of a rifle I'll just use a pun! 冲浪爷爷
User avatar
jaffa1949
Surfing Legend
 
Posts: 8179
Likes: 0 post
Liked in: 0 post
Joined: Thu Jul 08, 2010 12:01 am
Location: The super secret point breaks of Ober Österreich ( how many will notice the change)

Re: How to rip in small waves

Postby IB_Surfer » Fri Aug 14, 2015 6:25 am

Dude, just go get yourself either a thicker or longer board. I have 8 boards, 2 for small waves, one is a longboard, the other a minimall, one for small mush the other for small closeouts. And I have a retro fish for small waves too, when I want to still try to do cutbacks in 2ft surf.
User avatar
IB_Surfer
Surfing Legend
 
Posts: 3106
Likes: 0 post
Liked in: 0 post
Joined: Sun Oct 05, 2008 3:00 am
Location: San Diego, CAlifornia

Re: How to rip in small waves

Postby luizesg » Wed Nov 25, 2015 11:40 pm

As you can see, he is lightweight (73kg) and very skillful. He changes directions all the time always avoiding sinking any part of the board so that he loses momentun. This is very hard to master. He uses much of his waist movement ( i don't know how to express this in english) to generate speed. This is something for those above average can do.
luizesg
New Member
 
Posts: 11
Likes: 0 post
Liked in: 0 post
Joined: Wed Jun 03, 2009 7:31 pm


Similar topics

Return to Shortboarders Only